Electrical Slurry Meter for AAC Line
Description:
The vacuum room of the mixing plant is equipped with a visual mixing control program to enable automatic material mixing. After grinding, the sand slurry is pumped into the sand slurry tanks for storage and pouring. After oiling, the block mould f are transferred to the casting section. The lift-type casting head feeds the slurry into the block mould along its bottom to top. The guide plates on both sides of the casting head can evenly spread out the sand slurry and prevent it from splashing.
Application:
It is a meter (refer to the picture) used for measuring the powder before slurry feeding for mixing.
Structure:
The meter is composed of chamber, support ring, load sensor and pneumatic butterfly valve.
The drum shapes like a truncated cone, which make the discharge quick. It is made of rolling steel and there is washing pipe inside.
The support ring is made of steel and there is chamber on the top and the support ring below it, and there are 3 load electrical sensors hang among the chamber and support ring, and there is pneumatic butterfly valve in the discharge drum to control the program.
Work Principles:
When the slurry is fed into the chamber, the electrical sensor will transfer the weight to the display automatically, and it will output the signal to the computer. The discharge is controlled by the pneumatic valve.
Maintenanc:
Shut off the power supply after each shift, and clean the drum wall, in order to make sure the powder weighing is accurate
Clean the dust on the sensor and weighing display.
Caution:
It should follow the instruction when operate the meter
No other current is allowed to go through the electrical sensor, for example, when weld the ground wiring.
Do not sunshine the weighing display, and avoid any sudden temperature change and vibration
The meter has been calibrated before ex-factory, do not change.
Product Tags:
|
|
OEM Slurry Meter Automatic Concrete Block Making Machine Images
|
